Control Elements And Connectors; Evolution Cd8 Overview; Pin Configuration Of Connectors - AVM OVATION CD8 Operating Instructions Manual

2. Control elements and connectors

2.1 EVOLUTION CD8 / CD8T / CD8D overview
The numbers in the drawings below mark the control elements. They refer to the numbers in the text, where
the operation of the unit is described.
Front panel
1 2 3 4
1. Button power (on / standby)
2. Button < (Filter, programming playlist)
3. Button > (Filter, programming playlist)
4. Button PROG (Programming playlist, random)
5. Button FILT (select filter)
6. Button REP (repeat)
7. LED (lights up, when unit is stand by)
8. Display
Rear panel
CD8, CDT
16 17 18
16. Analogue outputs XLR
17. Analogue outputs RCA-cinch
18. Digital input AES/EBU
19. Digital inputs RCA-cinch 1&2
20. Digital inputs optical 1&2
21. Digital input USB1
22. Digital input USB2
23. Dig out optical

2.2 Pin configuration of connectors

2 1
3
XLR-input
1 = GND (shield)
2 = non inverting input
3 = inverting input
5 6 7 8 9
19 20 21 22 23 24 26 27
1
3
XLR-outputs
1 = GND (shield)
2 = non inverting output
3 = inverting output
10 11 12
9. CD-slot
10. Button STOP
11. Button PAUSE
12. Button PLAY
13. Button I<< (skip /search down)
14. Button I>>(skip /search up)
15. Button EJECT
I
O
28
24. Dig out coax
25. RS232 Communication port
26. Connector for external IR-receiver
27. Mains switch
28. Mains connector
29. Dig out XLR (CD8D only)
30. Dig out BNC (CD8D only
2
6
13 14 15
CD8D
29 24 23 30 26
3,5mm stereo
infrared input
GND IR-Signal
external IR-input (26)
I
O
27 28
+5V supply