Table of Contents
Advertisement
DataRoute voice User Manual
10. LAN (DHCP)
Configure the DataRoute voice's IP address and DHCP options.
Go to path DHCP -> LAN Setup
Set the required options then click the Apply/Save button
Important Note – changes will take effect immediately and if the IP Address of the DataRoute
voice is changed the connection to the web interface will be lost. The new IP address will need
to be entered into the web browser (The PC must be in the same subnet as the new IP
address to view the webpage).
IP Address – enter the IP address that the DataRoute voice will be available on. The default
IP address is 192.168.1.1.
Subnet Mask – enter the Subnet Mask. The default subnet mask is 255.255.255.0.
Enable IGMP Snooping – select to have the DataRoute voice monitor all IGMP network
traffic for the purpose of reducing the multicast overhead (Advanced option)
37
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Advertisement
Table of Contents
Need help?
Do you have a question about the DataRoute voice and is the answer not in the manual?
Questions and answers