freightliner Columbia Driver Manual page 18

Instruments and Controls Identification
Stationary Access Screens
When the parking brake is set, pressing the mode/
reset button will scroll through the stationary access
screens. See Fig. 2.6.
i. Odometer
ii.
Trip distance
iii. Trip hours
iv. Outside temperature
v. Diagnostic screen
vi.
Engine miles/hours/oil level
vii. Setup screen
viii. Back to odometer
Push
Push
Push
If "SERVICE" is displayed Service Cycle screens are enabled and either "MI" or "HOURS" is also displayed.
On some vehicles "OIL LVL" appears in the top row of the display, if equipped and enabled.
02/06/2007
2.9
Default Odometer
Display Screen
Hold To Reset Trip Miles
Hold
To Reset Trip Hours
With park brake on
Fig. 2.6, ICU4 Stationary Access Screens
Trip Information
Trip information allows you to view trip mileage and
time.
When the odometer reading is displayed, press the
mode/reset button once for trip distance. Press the
mode/reset button a second time for trip hours (en-
gine hours).
Press and hold the mode/reset button to reset trip
miles or hours to zero.
Ambient Air Temperature
When the ambient air temperature drops below 35°F
(1.7°C), the ICU displays a caution text at 1-second
intervals for five seconds and a chime sounds if the
Push
Push
Push
Push
Hold
Go to the Diagnostic
and Engine Display
Hold
Screens figure.
Go to the Diagnostic
Hold
and Engine Display
Screens figure.
For setup screens.
f040756