Using Remote Operation With A Direct Connection - Panasonic HC-X1000 Owner's Manual

Using remote operation with a direct connection

∫ Preparations before using remote operation
1 Install the smartphone application "Image App" on your smartphone. (l 39)
2 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
≥ If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the
device will be displayed when starting up the "Image App".
3 Register [Wi-Fi] to a USER button. (l 35)
∫ If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to ON.
1
Start up the smartphone application "Image App".
2
Touch the smartphone on
≥ Touch the NFC mark while a message asking you to touch the
NFC mark on the device is displayed on the smartphone
screen.
≥ If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on
≥ If the unit is not recognized even when touching the
smartphone, change positions and try again.
≥ When the connection is complete, the image of this unit will be displayed on the smartphone
screen.
∫ If the device is Android (non-NFC-compatible) or iOS
1
Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi
function.
is displayed
≥
2
Select the menu.
MENU
: [Wi-Fi Setup] # [
3
Touch [Change connection type].
4
Touch [QR code].
≥ QR code is displayed on the screen of this unit.
5
Start up the smartphone application "Image App".
6
On the smartphone, select [QR code], and scan the QR code displayed on the
screen of this unit.
≥ When using an Android device, the smartphone and this unit are connected directly, allowing you
to use remote operations.
40
SQT0477 (ENG)
of this unit.
of this unit again.
Direct Connection
]