Attaching The Tripod - Panasonic HC-X1000 Owner's Manual

2 Attach an external microphone
(optional) to the microphone holder, and
tighten the microphone holder screws.
3 Connect the external microphone to the
AUDIO INPUT1 terminal (XLR 3 pin).
≥ When wiring the microphone cable, use the cable
clamper of this unit.
∫ Attaching the INPUT terminal cap
Attach the INPUT terminal cap while the audio input terminals 1, 2 (XLR 3 pin) is not used.

∫ Attaching the tripod

≥ There are tripod receptacle that are compatible with
1/4-20UNC screws.
≥ Attaching a tripod with a screw length of 5.5 mm
(0.22 q) or more may damage the unit.


Microphone cable clamper
A
Microphone holder screws
B
External microphone (optional)
C
AUDIO INPUT1 terminal
D
(XLR 3 pin)
INPUT terminal cap
E
F Tripod receptacle




19
(ENG) SQT0477