Samsung SNB-8000 User Manual page 90

Network camera
Table of Contents

Advertisement

setup screen
• SSNR : Select Able or Disable for the video noise elimination function.
• SSNR level : Adjust the noise reduction level.
• Lens : Select to set the lens mode of the camera to Manual or Auto.
- DC(Auto) : Select this if you use the DC lens. Only the iris is adjusted
automatically, but the focus is not controlled automatically.
- Manual : Select this if you use a lens on which you adjust the iris and focus
manually.
- P-Iris : It is selected to use the iris control lens equipped with a step motor.
The current sensor for each MB mode supports the 4 types of P-Iris lens below.
P-Iris lens supportable
5M Mode : LMVZ3510MIR
2M Mode : SLA-M3180PN/M13VP288IR/SLA-M2890PN
• P-Iris : Set up P-Iris.
- Auto : The iris is automatically adjusted to the amount of the surrounding light.
- Manual : Sets the iris manually to the desired position.
• P-Iris position : Set up the P-Iris position.
• AGC : Select AGC Control mode.
Adjust the gain value of the video (that, in particular, was recorded at a low
contrast scene and had a lower brightness level than normal) to control the video
brightness.
The lens may malfunction if the <Lens> mode is not reset during lens assembly or disassembly.
`
J
The image exposure can be saturated depending on the Shutter setup range.
`
90_ setup screen

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Snv-8080

Table of Contents