Samsung SNB-8000 User Manual page 49

3. In the <address> pane, provide the
necessary information.
• MAC (Ethernet) Address : The MAC
address imprinted on the camera
label is automatically displayed and
requires no user setting.
IP related parameters can be set only
`
M
when DHCP is not checked.
if not using a Broadband router
For setting <ip address>, <Subnet mask>, and <Gateway>, contact your network
administrator.
4. In the <port> pane, provide necessary
information.
• HTTP Port : Used to access the
camera using the Internet browser,
defaulted to 80.
• Device Port : Used to control the
video signal transfer, defaulted to
4520.
5. Enter the password.
Enter the password of "admin" account, which was used to access the camera.
For the security purposes, you are recommended to use a combination of numbers, alphabets
`
J
uppercase and lowercase and special characters for your password.
If you want to change the password, refer to "Administrator password change" of the user
`
setup. (page 77)
6. Click [oK].
Manual network setup will be completed.
English _49