Samsung SNB-8000 User Manual page 73

4. Configure <ptZ mode>.
PTZ mode can be activated by selecting it while the camera is in 5m mode and
outside.
When connecting to the camera from external NVR, ISV, our SmartViewer, and if the
PTZ control command is sent from them, the PTZ mode the administrator already
selected will be the one used for operation.
When DPTZ mode was selected, DPTZ is active in a profile set to DPTZ only.
5. Set the <video profile connection policy>.
• Keep connection when profile setting is changed : Changing profile properties that
is used by existing connection does not affect such connection and remains with
old profile setup.
If not selected, changing a profile used by an existing connection resets such
connection.
6. Select each profile properties.
For more details, refer to "to add/change the video profile". (Page 75)
7. Click the input box of each item and enter / select a desired value.
The context menu may differ depending on the selected codec type.
`
• Default profile : If no profile is selected when using the Web Viewer, the default
video profile is applied.
• E-mail/FTP profile : Video profile to be transferred to the specified email or FTP
site.
Only the MJPEG codec can be set as the E-mail/FTP profile.
`
• Record profile : This is the profile that is applied to video recording.
• DPTZ : If you select a profile to DPTZ in 5m mode, the profile operable for DPTZ is
selected in the DPTZ check box and the screen area can be adjustable.
• Audio-In : Sets whether to use audio for video recordings.
English _73