setup screen
DptZ setup
Use this settings page to move the camera view and perform the digital zoom.
1. Select the <Basic (
Setup menu.
2. Click <DptZ setup>.
3. Click [▼ Show].
4. Click the cursor [
moving pad to control movement of the
screen.
• Move screen: Scroll the cursor in the
direction desired.
• Control screen movement rate: The
farther the cursor is from the center
of the screen, the faster the screen
moves.
5. Control zoom movement.
• Zoom In: Move up the bar in the right
of the UI, or press the [
The farther the bar is from the center,
the faster the screen expands.
• Zoom Out: Move down the bar in the
right of the UI, or press the [
button. The farther the bar is from the
center, the faster the screen reduces
in size.
When performing the sequence action
`
J
at a high or low temperature, the system
may respond slower than the set rate for accurate sequence action.
82_ setup screen
)> tab from
] on the screen
] button.
]