Advertisement
Ion
Gateway
®
Cellular Gateway and Wireless Sensors
new sensor networks, and manage wireless gateways
and sensors for your network(s).
Note: Some buttons and features are only visible if
there is more than one sensor network setup on the
account, such as the network selection box in the
upper right corner.
If more than one sensor network is setup on the
account, you can easily move gateways and sensors
from one network to another by clicking on the "Move
Device" button at the far right of the device's "Status"
section.
If you clear a sensor's data, the data history is deleted
from the entire system and can not be recovered.
We recommend exporting a sensor's data history
using the export function in the sensor details view
("Overview" page) before clearing the sensor's data if
you want to have a record of the data.
a
I
ddItIonal
nformatIon
You can find additional information on using Ion
Gateway
Wireless
Sensors,
documentation and video tutorials on the Ion
Gateway
website
at
support.
Or call 877-ION-0291 (877-466-0291) Monday
through Friday, 8 a.m. - 5 p.m..
& s
upport
including
product
http://www.iongateway.net/
QUICK START GUIDE
Dated: 02/03/2014
Document Name: Ion Gateway_QS
I
nformatIon to
This equipment has been tested and found to comply
with the limits for a Class B digital devices, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful
interference
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one of more of the
following measures:
1. Re-orient or relocate the receiving antenna.
2. Increase the separation between the equipment
and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
WARNING: Changes or modifications not
expressly approved by Ion
void the user's authority to operate the equipment.
RF EXPOSURE WARNING: To satisfy FCC
RF
exposure
transmitting devices, a separation distance of 20 cm.
or more should be maintained between the antenna
of this device and persons during device operation.
®
To ensure compliance, operations at closer than this
distance are not recommended. The antenna used
®
for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.
For additional information or more detailed instructions
on how to use your Ion
or the Ion
Gateway Online System, please visit us on
®
the web at http://www.iongateway.net/support.
Page 9 of 9
u
sers
to
radio
communications.
Gateway could
®
requirements
for
mobile
Gateway Wireless Sensors
®
www.iongateway.net
Advertisement
