Advertisement
Ion
Gateway
®
Cellular Gateway and Wireless Sensors
7. On the next screen, enter a name for the
wireless sensor and use the drop down to tell
us how you are going to be using the wireless
sensor. (This allows us to suggest settings
for your sensor.) When finished, click the
"Continue" button.
8. Setup sensor notification(s). The next screen
will allow you to setup notifications for the sensor
that was just added to the network. You have
the option of using pre-configured notifications
based on suggestions from our system, or you
can create your own custom notification. If you
www.iongateway.net
QUICK START GUIDE
Dated: 02/03/2014
Document Name: Ion Gateway_QS
choose to create your own notification, it will be
available for any similar sensors that are added
to your account in the future.
9. Custom notifications: To create a custom
notification, click on the "Create your own"
button. Set your custom notification settings
and click "Save".
10. Assign any additional sensors: When you have
finished setting up the sensor, you will see a
confirmation screen. At this point you can
assign additional sensors to your network or
begin using the system by clicking "Done".
Page 2 of 9
Advertisement
