Advertisement
Ion
Gateway
®
Cellular Gateway and Wireless Sensors
Note: If your gateway powers up and the lights do not
turn green, you may have a connectivity issue. Wait a
few minutes to see if the lights will turn green. If they
do not, power off the device by switching the power
button, then turn the device back on. If it still does not
connect, try resetting the device to the factory settings.
If this still does not fix the issue, try disconnecting
then reconnecting power. If it still does not connect,
try resetting the device to the factory settings. If this
still does not fix the issue, call customer support.
4. Configuring The Cellular Gateway: The cellular
gateway collects data from all sensors within
range and is pre-configured to batch deliver the
sensor messages to the online system at the
specified heartbeat (every 60 minutes by default
factory settings). You can access gateway
settings by clicking on "View Gateways" in the
top bar of the "Overview" page. Clicking on
a gateway in the list, opens the detail view.
Click on the "Edit" tab to access the gateway's
settings. See notifications on following pages to
set up Gateway notifications.
w
s
Ireless
ensors
Insert Batteries Into Wireless Sensors
WARNING: Make sure your sensors are at
least 3 ft. away from Ethernet Gateway.
Peel back the black sticker cover of the battery slot
and slide the coin cell battery into the sensor as shown
in fig.1. It will power on within 10-20 seconds. Once
online, your sensor is ready to be deployed. If you
wish to change a sensor configuration, change the
parameter in the software. The new parameters will
be transmitted to the sensor on the next heartbeat.
If you need a more immediate response from the
sensor, power cycle the sensor by removing, then re-
inserting the battery.
Note 1: If the sensor status indicator does not change,
reset the sensor by removing the battery. Wait 60
seconds then re-insert the battery. When inserting
the battery, make sure to push the battery all the way
back using a paper clip.
Note 2: Be aware of the proper
orientation of battery in fig.1.
QUICK START GUIDE
Dated: 02/03/2014
Document Name: Ion Gateway_QS
WARNING: Your sensors ship with a 10
minute heartbeat. It is recommended that you
should set the heartbeat to no faster than one hour to
preserve battery life. When changing a sensor's
heartbeat, the new configuration information will be
sent to he sensor on it's next heartbeat. If you want to
update the sensors immediately you can reset them
manually.
Manual Sensor Reset Process:
1. Using the end of a paper clip, push the batteries
out of the sensors through the small hole in the
top of the sensor.
2. Change the sensor heartbeat through the
online system.
3. Re-insert the batteries into the sensors
o
w
nlIne
Ireless
Menu System
Sensors Overview
Understanding The Online Interface:
When you log into the online system, the default view
shows all of your sensors last recorded data.
Page 5 of 9
s
s
ensor
ystem
View/Sort Features
Date Range Selector
Sensor Details View
www.iongateway.net
Advertisement
