Advertisement
Ion
Gateway
®
Cellular Gateway and Wireless Sensors
sensor overview row to display the details view. Click
on the "Edit" tab to access the sensor configuration
panel.
The sensor edit panel allows you to set the primary
configurations for the sensor. Mousing over the
question mark icon by each setting will provide an
explanation of that setting. When you have finished
making changes, press the "Save" button at the
bottom of this section.
Note: Be sure to click the "Save" button anytime you
make a change to any of the sensor parameters.
All changes made to the sensor settings will be
downloaded to the sensor on the next sensor
heartbeat (check-in). Once a change has been made
and "Saved," you will not be able to edit that sensor's
configurations again until the sensor has downloaded
the new setting.
Editing and Adding Notifications
Notifications for a single sensor can be created,
deleted or edited by clicking the "Notifications" tab in
a sensor's detail view.
Notifications can be created, deleted or edited
for any sensor or group of sensors by clicking on
"Notifications" in the main menu.
QUICK START GUIDE
Dated: 02/03/2014
Document Name: Ion Gateway_QS
The Notification List Window
To create a new notification, click on "Create new
notification" then name the notification and select the
type of notification you would like to create.
Gateway Entered Battery Mode
Class of Notification
There are four notification options available when
creating a new notification.
1. Application: Application notifications are sensor
specific (i.e. water sensor = trigger alert when
water present, temp sensor = trigger alert
when temp is above 70 F., etc.). If creating an
application specific notification, you will need to
choose what sensor type you are creating the
alert for. The system will automatically populate
a list of sensor types that are currently being
used within the network. The notification you
create will be based on the selected sensor
type.
2. Inactivity: Set-up "Inactivity" notifications to
alert you when your sensors have stopped
communicating with the servers. Failure to set
up an "Inactivity" notification will result in no
email/SMS text being sent should your sensors
stop communicating with the servers.
Page 7 of 9
Recommended
Gateway
notifications
that should be
manually set up.
www.iongateway.net
Advertisement
