KBE-268-4220K_Instructions.qxd
29/09/2011
DECLARATION OF CONFORMITY
We hereby certify that the Kobe Model DMM3550 Magnetic Drilling & Milling Machines
complies with all the relevant provisions of the following directives:
LOW VOLTAGE DIRECTIVE 2006/95/EC
MACHINERY DIRECTIVE EN 792, 2006/42/EC
RoHS DIRECTIVE 2002/95/EC
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 2004/108/EC
P.O.Box 14, Wigston Works, Leicester, England.
QUALITY GUARANTEE & WARRANTY
KOBE POWER TOOLS carry one years manufacturers warranty.
KOBE POWER TOOLS are designed & produced
to the highest standards & specifications
KOBE POWER TOOLS are fully guaranteed against
faulty materials & workmanship
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
This does not affect your legal rights.
Please retain supplier invoice as proof of purchase.
AVAILABLE FROM YOUR DISTRIBUTOR
KOBE TOOLS Official Agents:
JAPAN: MIKI TOOL TRADING CO. MIKI CITY, JAPAN.
EUROPE, MIDDLE EAST, AMERICA & AFRICA: KENNEDY TOOLS, WIGSTON, ENGLAND.
Supplied by an ISO9001 approved company
Kobe Tools continually strives to improve its products, specifications may change without prior notice.
Kobe and the Rising Sun logo are trade marks of Kobe Power Tools.
© The Kennedy Group Ltd. 10/11
12:36
Page 1
Official Agent
KENNEDY TOOLS
MAGNETIC DRILLING & MILLING MACHINES
Suitable for light industrial use.
Power ful 1200W motor provides
enough power to drill holes up to
35mm diameter.
Speed: 595rpm.
Gravity feed coolant
13mm Chuck and Weldon
adpadtor.
MODEL DMM3050
ORDER CODE
KBE-268-4220K (240v)
WARNING: THE SAFETY INFORMATION
GIVEN INSIDE MUST BE READ AND
UNDERSTOOD BY ANY PERSON
USING, INSTALLING, REPAIRING
OR MAINTAINING THIS MACHINE.
OPER ATOR'S MANUAL
Please retain this information for future reference.
ALWAYS WEAR
APPROPRIATE
PERSONAL
PROTECTIVE
EQUIPMENT.