THE ENVIRONMENT
KOBE
I N D U S T R I A L
POWER TOOLS
Always dispose of unwanted tools, accessories and packaging materials in an environmentally
friendly manner.
In observance of the European Directive on Waste Electrical and Electronic Equipment (WEEE) and
its implementation in accordance with national law, electrical goods that have reached the end of
their life must be collected separately and returned to an environmentally compatible recycling
facility.
Do not dispose of electrical goods with domestic waste materials as inappropriate disposal may
cause potential hazards to the environment and human health.
For further information, please contact your local authority or the retailer from whom you purchased
the product.
This product does not contain any restricted substances in concentrations and applications which
are banned by the European RoHS2 Directive.
DECLARATION OF CONFORMITY
We hereby certify that KOBE MAGNETIC DRILLING & MILLING MACHINE 110V
(ORDER CODE: KBE-268-4210K)
complies with all the relevant provisions of the
EMC Electromagnetic Compatibility Directive 2014/30/EU
EN55014-2:2015, EN55014-2:2015
RoHS2 Restriction of Hazardous Substances Directive 2011/65/EU
Position:
Compliance Manager
THE KENNEDY GROUP LTD, WIGSTON, ENGLAND, LE18 2FS.
QUALITY GUARANTEE & WARRANTY
KOBE INDUSTRIAL POWER TOOLS carry a one year manufacturer's warranty.
KOBE INDUSTRIAL POWER TOOLS are designed & manufactured
to the highest standards & specifications
Assuring the quality and performance required by all sectors of industry.
KOBE INDUSTRIAL POWER TOOLS are fully guaranteed against
faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
Please retain supplier invoice as proof of purchase.
KOBE TOOLS OFFICIAL AGENT: THE KENNEDY GROUP LTD., WIGSTON. LEICESTER, ENGLAND. LE18 2FS
© The Kennedy Group Ltd. 04/18
Standards Applied:
Standards Applied:
EN 50581-1:2012
KOBE TOOLS
MAGNETIC DRILLING
& MILLING MACHINE 110V
MODEL:
DMM3050i
OPER ATOR'S MANUAL
WARNING: THE SAFETY INFORMATION GIVEN INSIDE MUST BE
READ AND UNDERSTOOD BY ANY PERSON USING, INSTALLING,
REPAIRING OR MAINTAINING THIS PRODUCT.
Please retain this information for future reference.
ORDER CODE:
KBE-268-4210K
• Suitable for light industrial use
• 13mm Chuck and Weldon adaptor
• Powerful 1200W motor provides
enough power to drill holes up
to 35mm diameter
• Speed: 595rpm
• Gravity feed coolant