Olympia GS506 User Manual

Smoke Alarm
Smoke Smoke Smoke Alarm Alarm Alarm User
Model Model number: number: GS50 GS506 6 6 6 GS50
Model number: Model number: GS50
Thank you for purchasing our smoke alarm. Please take a
few minutes to read the user's manual thoroughly and
familiarize yourself and your family with its operation. And
save it for future reference.
Product Specifications:
Product Specifications: Product Product Specifications: Specifications:
P P P P OWER OWER OWER OWER : DC9V ( Carbon-Zink Type:GOLITE #G6F22,
1604D)
OPERATION CURRENT OPERATION OPERATION OPERATION CURRENT CURRENT CURRENT : : : : <10uA (standby), <30mA (alarm)
A A A A LARM LARM VOLUME LARM LARM VOLUME VOLUME VOLUME : >85dB(A) at 3 meters.
ALARM ALARM ALARM S S S S ENSITIVITY ENSITIVITY ENSITIVITY
ALARM ENSITIVITY : 0.10-0.19dB/m.
Description: Description:
Description: Description:
The unit is a photoelectric 9V DC smoke alarm. It is operated
by 9v battery (6LR61 or 6F22), battery life 1 year minimum.
With the photoelectric technology, it is more sensitive to
detecting slow smolder fires which general thick, black
smoke, little heat and may smolder for hours before bursting
into flames. The smoke alarm do not contain the radioactive
material which is harmless to the environment.
The smoke alarm should be installed in every room (except
the bathroom), and every other area of the home, making sure
the people in the home will be able to hear and respond to the
alarm sound. For minimum protection you should fit an
alarm in the hallway between the living areas and sleeping
areas. Place the unit near to the living areas as possible and
ensure the alarm is audible when the bedrooms are occupied.
Typical single storey dwelling with recommended:
Install a smoke alarm on the ceiling or wall inside each
bedroom and in the hallway outside each separate sleeping
area. If a bedroom area hallway is more than 30 feet long,
install a smoke alarm at each end. If there is a basement:
install a smoke alarm on the basement ceiling at the bottom
of the stairwell.
User Manual
User Manual User Manual Manual
Ref Ref ST506 ST506
Ref：ST506 Ref ST506
EN14604:2005
Typical multi-storey dwelling with recommended protection.
Install a smoke alarm on the ceiling of wall inside each
bedroom and in the hallway outside each separate sleeping
area. If a bedroom area hallway is more than 30 feet long,
install a smoke alarm at each end install a smoke alarm at the
top of a first – to- second floor stairwell.
Important Important Safety Safety
Important Important Safety Safety Information:
1: The test button accurately tests smoke alarm functions. Do
not use any other test method. Test smoke alarm weekly to
ensure proper operation.
2: Do not remove or disconnect battery. This will take out
your protection. Open windows or fan the air around
smoke alarm for silence it.
3: This smoke alarm should be installed only by a licensed,
qualified electrician. Observe and follow all local and
national electrical and building codes for installation.
4: This smoke alarm is designed to be used inside a single
family only. In multifamily buildings, each individual
living unit should have its own smoke alarms. Do not
install in non-residential buildings. And this smoke alarm
is not a substitute for a complete alarm system.
5: Install a smoke alarm in every room and on every level of
the home. Smoke may not reach the smoke alarm for
many reasons. For example, if a fire starts in a remote
part of the home, on another level, in a chimney, wall,
roof, or on the other side of a closed door, smoke may not
reach the smoke alarm in time to alert household
members. A smoke alarm will not promptly detect a fire
except in the area or room in which it is installed.
6: Smoke alarm may not alert every household member every
time. The alarm horn is loud in order to alert individuals
to a potential danger. However, there may be some
circumstances where a household member may not hear
the alarm (i.e. outdoor or indoor noise, sound sleepers,
drug or alcohol usage, the hard of hearing, etc.). If you
suspect that this smoke alarm may not alert a household
member, install and maintain specialty smoke alarms.
Household member must hear the alarm's warning sound
and quickly respond to it to reduce the risk of damage,
injury, or death that may result from fire, If a household
member is hard of hearing, install special smoke alarms
with lights or vibrating devices to alert occupants.
7: Smoke alarms can only sound their alarms when they
detect smoke or detect combustion particles in the air.
They do not sense heat, flame, or gas. This smoke alarm is
designed to give audible warning of a developing fire.
- 1 -
Information: Information:
Information:
Version:B