Ericsson R380s User Manual page 191

Hide thumbs Also See for R380s:
Table of Contents

Advertisement

Notepad notes.
No network
This indicates that no network is within range. The reason for this is
either:
You are in an area that is not covered by a network.
1.
The received signal is too weak, possibly because you are being
2.
shielded from the signal. Move to obtain a sufficiently strong
signal. Check your display Signal strength indicator.
Phone locked
Phone locked is displayed followed by the prompt
Your R380s is locked to prevent unauthorized use.
To unlock the R380s:
Enter your personal security code then press # (or
PIN & unblocking PUK code
Contact your dealer if you have forgotten your PIN or unblocking
PUK code. The only way to unlock your R380s is by using your PIN
or unblocking PUK code.
Tip!
Store PIN and unblocking PUK code information in a safe
place. For security reasons, it may take some time to unlock the
R380s if this information is lost or misplaced.
Start problems
Hand-held phone: Recharge or replace the battery.
Vehicle hands free: Check that the R380s is properly inserted into
the holder and check the fuse in the fuse holder: which is
connected to the battery cable.
Wrong PIN
The PIN code has been entered incorrectly. The message is followed
by the prompt
Enter PIN
Enter the PIN code correctly and press
Note:
If your PIN is entered incorrectly three times in a row, the SIM
card is blocked. You can unblock it by using your PUK.
.
#
Enter code:
Y ES
(or
).
YE S
Troubleshooting
.
).
191

Advertisement

Table of Contents
loading

Table of Contents