Default Settings - GE 21091 User Manual

NOTE: If you want to re-enter the security code, enter the numbers again and
press the OK soft key. The new numbers will replace the old numbers.
5. Press the EXIT soft key to keep the current security code and return to
the answerer setup menu.
6. Press the OK soft key, and you will hear a confirmation tone. The new
security code shows in the display.
D S
EFAULT ETTINGS
If you prefer to use the system's original settings, follow the steps below to
return the answering system to the factory default settings.
1. Make sure your base is in the answerer setup mode.
2. Use the CID/messages (
3. Press the OK soft key and DEFAULT SETTING 1YES 2NO shows in
the display.
SECURITY CODE
628
OK
SECURITY CODE
628
) button to scroll to DEFAULT SETTING .
or
SECURITY CODE
DEFAULT SETTING
OK
DEFAULT SETTING
1YES 2NO
OK
EXIT
EXIT
EXIT
53