Ecurity; For Remote Access - GE 21091 User Manual

5. Press the OK soft key to confirm. You will hear a long confirmation tone
and RING SELECT 5 shows in the display.
6. Press the EXIT soft key to keep the current setting and the unit returns to
the answerer setup menu.
S S
ETTING THE
The product provides you with the ability to access the answering system
from a tone dialing telephone in another location. The security code is
required for remote access, and it prevents unauthorized access to your
answering system. The default security code is 1 2 3, and you may only
change the security code at the base.
1. Make sure the phone is OFF (not in talk mode), and make sure the
phone is in the answerer setup mode.
2. Use the CID/messages (
SECURITY CODE .
3. Press the OK soft key, and SECURITY CODE 123 shows in the display.
4. Use the touch-tone pad on the base to enter your new 3-digit security code.
For example, press the 6, 2, and 8 number key for security code 628 .
52
RING SELECT
C

ECURITY

ODE FOR
or
RING SELECT
SECURITY CODE
OK
SECURITY CODE
OK
5
R A
EMOTE CCESS
) button on the base to scroll to
EXIT
1 2 3
EXIT