!"#$%&'()*$#+,,-#.#/01,,2034567(809:;<%%=##>*7)*#?E##@%4)&5A#-1;#B=)%<*$#-,,C##??DC?#??
Remove the stopper from the filler hose
and push the end of the hose onto the
tyre valve.
Hold the bottle with the filler hose
pointing downwards and squeeze it.
Press the entire contents of the bottle
into the tyre.
Pull the hose off the valve and remove
any residual sealant from the valve,
rim and/or tyre.
Screw the original valve insert (or the
replacement one if necessary) back
into the valve with the valve remover.
Breakdown set*
Fit the compressor's air hose
accurately onto the valve.
Plug the power connection into the 12
volt power socket.
Inflate the tyre to at least 1.8 bar
(maximum 2.5 bar).
>Note!
Do not run the electric compressor for
more than six minutes. If you do so, there
is a risk of overheating!
Helpful hints 10 13