Table of Contents
Advertisement
CarNetix PSU-PC19 V2.0 Installation Manual
Watts). The PSU-PC19 can accept battery input as low as 7 volts under full load (140 watts) during
cranking while providing a well-regulated output so that your Xenarc SC8 not crash.
A third output can be added to the PSU-PC19 by installing the optional CNX-P5V regulator. This
will allow the PSU-PC19 to power your Xenarc SC8 (Primary Output), your Xenarc LCD screen
(+12V Secondary Output), and your USB devices (+5V from the P5V) simultaneously!
The PSU-PC19 includes all of the sophisticated features of its predecessors (P1260 and P1280/90)
such as Startup/Shutdown controller, Pulse Start (remotely start the PSU-PC19 with door locks, car
alarm, or wireless device), and DelayON (prevents speaker "thump" during booting). The PSU-
PC19 fully and safely supports "Standby" mode and will automatically shut itself down (by
detecting excess current drain) if the Xenarc SC8 fails to properly go into Standby mode.
The PSU-PC19 includes a power cable kit for "plug and play" installation with the Xenarc SC8
computer. This simplifies the installation and provides a safe, reliable connection for your Xenarc
SC8.
Figure 2 PSU-PC19 Power Cable Kit
- 5 -
Advertisement
Table of Contents
