Okayo UHF-PLL EJ-701DR-PLUS User Manual page 8

Wireless Receiver Module DR-500
2. Press Up Frequency Selector key "
will show
If there is no channel available, the channel value would be kept the same.
3. Press Down Frequency Selector key
window will show
automatically. If there is no channel available, the channel value would be kept
the same.
4. Using two
Press Up and Down Frequency Selector keys
module 1 for more than 1 second, you could find two available channels.
Switch on two Transmitters used for Wireless Receiver Module 1 and adjust
the channel number accordingly.
Press Up Frequency Selector key
than 1 second, you could find available channel for Channel A.
Switch on the third Transmitter used for Wireless Receiver Module 2 and adjust
the channel number accordingly.
Press Down Frequency Selector key (3) on Wireless Receiver Module 2 for more
than 1 second, you could find available channel for Channel B.
Switch on the forth Transmitter. Finalize the process of four channels used
simultaneously.
Setting of Group Number and SQ Value
1. Press "Set" key (4) and then switch on Channel A or Channel B to enter Group
and then LCD window would show
2. Press "Up" or "Down" Frequency Selector keys (3) to look for your preferred
group number.
3. Press "SET" key (4) to confirm the group setting or wait for 5 seconds to confirm
it automatically and then enter setting mode of SQ value.
4. Under setting mode of SQ value, LCD window will show
blinking).
5. Press "Up" or "Down" Frequency Selector keys (3) to choose SQ value the value
will not be set in circulation.
6. Press "SET" key (4) again to confirm the group setting or wait for 5 seconds to
confirm it automatically and then back to normal switching-on mode.
CAUTION!
Please keep the distance between the Transmitter and the Receiver more than M
Please keep the distance between the Transmitter and the Transmitter more than
0.5 M.
7
"
, Channel A would be switched to available channel automatically.
A
" "
DR-500 wireless receiver modules simultaneously
" " " "
" "
" "
(3) for more than second and then LCD window
(3) for more than second and then LCD
, Channel B would be switched to available channel
B
(3) on Wireless Receiver Module 2 for more
(number will keep blinking).
6
1 ,
1 ,
:
(3) simultaneously on DR-500
(number will keep
setting,
,
2 .