Power Supply - Supero SuperServer 1027GR-TRFT series User Manual

S S
UPER ERVER 1027GR-TRF/1027GR-TRFT Series User's Manual
Figure 6-6. Removing a Hard Drive Carrier
Figure 6-7. Installing a Hard Drive into a Carrier
Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the
!
Supermicro Web site at http://www.supermicro.com/products/nfo/storage.
cfm
6-5

Power Supply

The 1027GR-TRF/1027GR-TRFT series server includes an 1800 watt redundant
power supply consisting of two power modules. Each power supply module has an
auto-switching capability, which enables it to automatically sense and operate at a
100V - 240V input voltage.
If either of the two power supply modules fail, the other module will take the full
load and allow the system to continue operation without interruption.
Replacement units can be ordered directly from Supermicro. The power supply
units have a hot-swap capability, meaning you can replace the failed unit without
powering down the system.
1
1
6-8
1
2