B Boom Microphone - Phonak FreeCom 7100 User Manual

B Boom Microphone

B1 To place the boom microphone
u Adjust the boom microphone to sit within 1 cm of your mouth, close to your upper lip.
u Ensure that the microphone sound inlet, marked with a white dot points towards your
mouth (Fig 9) to avoid any twisting of the boom microphone.
u The boom microphone sound inlet has to be placed always parallel to the mouth (Fig 9).
u The boom microphone can be placed on the left or on the right side (Fig 10).
B2 To use / mount / remove the windscreen
u To keep the windscreen in position, the boom microphone is equipped with a Velcro
part (Fig 11).
u To mount the windscreen to, or remove it from, the boom microphone, lift the windscreen
over the Velcro part and pull it on or remove it from the microphone (Fig 11).
Fig 9 Fig 10
Fig 11
9