Subaru 2015 BRZ Owner's Manual page 54

Ending a call
On the Talking screen, touch
call by hanging up the cell phone. When a call ends, the handsfree
screen disappears.
Entering numeric keys
On the Talking screen for outgoing calls, touch
display the Dial Tone screen and enable numeric key input.
• (Send):
Send
Send a dial tone that has already been registered in the phone book.
(Exit):
Exit
Skip the tones.
to end the call. You can also end the
Dial Tone (Dial Tone) to
Call waiting
If a call arrives from another phone while you are already talking, you
can put the current call on temporary hold by using the Talking screen
and receive the new incoming call.
1
When you hear the ringtone, touch
screen.
• You can put the current call on hold and connect to the new
call.
• To end call waiting, touch
phone connects to the call that was put on hold and you can
continue the previous call.
• During call waiting, touch
callers.
NOTE
If a call waiting contract has not been setup for the cell phone itself, you cannot
use the call waiting function.
Before Use
on the Talking
. When call waiting ends, the
again to switch between the
Introduction 53