Subaru 2015 BRZ Owner's Manual page 197

Basic Operation
Using a preset sound quality
1
On the Sound Settings screen, touch
EQ Settings.
2
Touch any button from
corresponding preset sound quality.
• To reset the sound quality, touch
Resetting the EQ curve
You can return the adjusted value for the currently stored equalizer to
its initial value.
1
Touch (Flat) for 2 seconds or more.
Flat
• The adjusted values for the stored
to their initial values.
■
Adjusting the Audio Balance
Adjusting the positioning selector (Only for type B)
You can change the sound localization according to the number and
position of passengers. Also, you can adjust the sound balance from
front to rear and left to right to optimize the sound from speakers from
which sound has difficulty traveling.
1
On the Sound Settings screen, touch
Sound Position.
196 Audio and Visual
(Adjust) in
Adjust
to to activate the
Flat (Flat).
to are returned
(Adjust) in
Adjust
2
Touch the seat that you want to set.
• A frame appears around the set position. Touch again to cancel
the setting.
• 4 positions are available for setting: the front right seat, the front
left seat, both front seats, or the rear seats.
• Touch Off (Off ) to cancel all the settings.
• After completing the adjustment, touch
adjusted settings and return to the previous screen.
NOTE
You cannot set positioning selector adjustments at the same time as the volume
balance. (Only for type B)
to save the