Picture Control - Orion OLMU-5520 User Manual

6. Click "Stop" button to end "Slide Control"
7. Save or Load the slide configuration
- Click "SAVE" button to save user added Slide configuration as "*.ssd" file.
- Click "LOAD" button to open saved "*.ssd" file.
• When you load "Slide File", previous slide configuration
and new slide configuration must be identical.
• If they are different, the file cannot be loaded. So,
Caution
revise the new slide file configuration as previous
configuration or save as new file.
※ To view the saved screen configuration, select the list from "List Box."
※ Saved screen protocol is transmitted to MLCD by double clicking the list.
- 46 -

4.10.2. Picture Control

• Register values related to display of MLCD can be changed.
• To use Picture Control, go to MSCS Menu  Control  Picture Control or press "Ctrl+P" using Keyboard.
• In order to control display values, input values directly in "Edit Box" and press Enter key.
Or click -/+ button using mouse.
• Click "Exit" button or press "Ctrl+X" using keyboard to close "Picture Control" window.
• Brightness : The range of "Brightness" you can adjust is 0 to 100.
• Contrast : The range of "Contrast" you can adjust is 0 to 100.
• Sharpness : The range of "Sharpness" you can adjust is 0 to 24.
• Tint : The range of "Contrast" you can adjust is -50 to 50.
• Color : The range of "Sharpness" you can adjust is 0 to 100.
• Dimming : The range of "Dimming" you can adjust is 0 to 100
• Color Temp : Change the color temperature of the screen
-4000K, 6500K, 10000K, User
- 47 -