Finishing The Installation - Minka-Aire JAVA F753 Instruction Manual Warranty Certificate

Step 1. Remove 1 of the 2 screws from the bottom of the hanger bracket and loosen the other
one half a turn from the screw head.
Step 2. Slide the canopy up towards the hanger bracket and place the key hole on the canopy
over the screw on the hanger bracket, turn canopy until it locks in place at the narrow section of
the key holes. (Fig. 14)
Step 3. Align the circular hole on canopy with the remaining hole on the hanger bracket, secure
by tightening the two set screws.
Note: Adjust the canopy screws as necessary until the canopy and canopy cover are snug.

FINISHING THE INSTALLATION

OUTLET BOX
HANGER
BRACKET
HANGER
BALL
Fig. 14
6
CANOPY
CANOPY
COVER