Calibrating Power Pods And Slope - Suunto AMBIT3 PEAK 1.5 User Manual

3.25.3 Calibrating power PODs and slope

Suunto Ambit3 Peak automatically calibrates your power POD when
it finds the POD. You can also calibrate the power POD manually at
any time during an exercise.
To manually calibrate a power POD:
1. While you are in a sport mode, keep [Next] pressed to access the
options menu.
2. Stop pedaling and lift your feet off the pedals.
3. Scroll to CALIBRATE POWER POD with [Light Lock] and select
with [Next].
Suunto Ambit3 Peak starts calibrating the POD and indicates if the
calibration succeeded or failed. The bottom row of the display
shows the current frequency used with the power POD. The
previous frequency is shown in parentheses.
Calibration
ongoing...
If your power POD has an auto zero feature, you can turn this
on/off through your Suunto Ambit3 Peak.
To set auto zero on/off:
1. After the calibration is completed, press [Start Stop].
2. Set auto zero On/Off with [Light Lock] and accept with [Next].
Calibration
successful
120(150)
75