General Safety Information; Safety Labels - Orient BTP-R880NP Installation Manual

Single station thermal printer
Hide thumbs Also See for BTP-R880NP:
Table of Contents

Advertisement

General Safety Information

Before installing and using the printer, please read the following items carefully.

Safety Labels

Don't touch the cutter and tear bar of printer.
The print head is a thermal element and it is at high temperature during printing or just
after operation, therefore please do not touch it and its peripherals for safety reasons.
The thermal head is an ESD-sensitive device. To prevent damage, do not touch either
its printing part or connecting parts.
Caution
Install the printer on a flat and stable place.
Reserve adequate space around the printer so that convenient operation and maintenance can be
performed.
Keep the printer away from water source.
Do not use or store the printer in a place exposed to heat of fire, moisture, serious pollution and
direct sunlight.
Do not place the printer on a place exposed to vibration or impact.
No dew condensation is allowed to the printer. In case of such condensation, do not turn on the
power until it has completely gone away.
Connect the DC adapter to an appropriate grounding outlet. Avoid sharing a single electrical with
large power motors and other devices that may cause the fluctuation in voltage.
Disconnect the DC adapter when the printer is not used for a long time.
Don't spill water or other materials on the printer. If this happens, turn off the power immediately.
Do not allow the printer to start printing when there is no recording paper installed, otherwise the
print head and platen roller will be damaged.
To ensure quality print and normal lifetime, use recommended or good quality paper.
Shut down the printer when connecting or disconnecting interfaces connectors to avoid damage to
the control board.
Set the print darkness to a lower grade as long as the print quality is acceptable. This will help to
keep the print head durable.
The printer should only be disassembled or repaired by a technician, who is certified by the
manufacturer.
Keep this manual safe and at hand for ready reference.
BTP-R880NP Installation manual
- 2 -

Advertisement

Table of Contents
loading

Table of Contents