Loading The Paper Roll - Orient BTP-R880NP Installation Manual

3.3Loading the Paper Roll

Note: Be sure to use paper rolls that meet the specifications. Do not use paper rolls
that have the paper glued to the core because the printer cannot detect the
paper end correctly.
1) Turn off the printer.
2) Open the printer top cover, as in the following figure.
3) Put the paper roll into the paper holder. See figure below.
Note: Recommend paper
TF50KS-E2C,TF50KS-E
F70NA
F240AC/F220-VP,FV230A1,PA220AG,HP220A
PD150R,PD160R
F5041，F5051，P5045，P5055
KF50，KP440
KT55F20，KT58F20，KT55HS
P300，P350，P530
Caution:
Adjust the paper width by adjusting the paper guides according to the paper
type used.
Make sure that the paper roll is cut according to the requirement below before
loading:
Make sure that the heat sensitive side of paper faces the print head and the
rolling direction of paper meets the requirements. (See drawings under the top
cover). Note: If needed the heat sensitive side of the paper can be found by
scratching both sides of the paper with a hard object. The scratches on heat
BTP-R880NP Installation manual
Paper type
Nippon Paper Industries Co., Ltd
FUJI PHOTO FILM Co., Ltd
Mitsubishi Paper Mill Co., Ltd.
OJI Paper Co.,Ltd.
Mitsubishi HitTec Paper Flensburg GmbH
Kanzan Spezialpapiere GmbH
Papier-fabrik August Koehler AG
Kanzaki Specialty Paper
- 8 -
Manufactory