Led And Buzzers; Specifications; General Specifications - Orient BTP-R880NP Installation Manual

Ending hexadecimal dumping function
Hexadecimal dump mode can be ended by turning off the power, or by pressing
the FEED button three times.

4.3 LED and Buzzers

4.3.1 LED
LED
Power Indicator (Green)
(POWER)
Error Indicator (Red)
(ERROR)
4.3.2 Description of LED and Error Status
Error information
Print head is overheating
Input voltage is abnormal
Cutter Error
Cover Is Open
Paper End
Paper near end
Finding mark error or verify failed
Caution:
The temperature of the print-head is detected by means of a thermistor sensor.
If the temperature of the print-head becomes higher than 65℃, the protection
circuit of the printer will force the printer to stop printing.

5 Specifications

5.1 General Specifications

1) Printing method:
2) Dot density:
3) Printing direction:
4) Printing width (max):
5) Characters per line (default): Font A: 42
6) Character spacing (default): Font A: 0.25 mm {0.01"} (2 dots)
BTP-R880NP Installation manual
Status
On
Off
Off
Flash
Direct line thermal printing
203 DPI(H) ×180 DPI(V)
Unidirectional with friction feed
80mm {2.52 "}, 640 dot positions
Font B: 56
Kanji: 21
- 13 -
Description
Printer is powered on
Printer is powered off
Printer is in normal status
Printer is in error status or Paper
near end
ERROR LED
Six times
Five times
Four times
Three times
Twice
Flashing slowly
Flashing slowly
Buzzer
Six times
Five times
Four times
Three times
Twice
No sound
No sound