Bosch DHD series Installation Instructions Manual page 4

Parts Needed (standard)
G Tape Measure
G Phillips Head Screwdriver
G Aluminum Duct Tape
G Ductwork (configuration varies depen-
ding on location; See pages 7-12 for fur-
ther information)
G Additional Sheetmetal screws (as neces-
sary for ductwork installation)
G Saw (or equivalent for cutting counter-
top)
G #8 x 1 1/4" Wood Screws (4)
G Plumb Bob
G Wire to reach Remote or Inline Blower
Parts Needed (special)
G Special Blower
G Transition Box (for use only with Inline
and Remote Blowers)
G Recirculation Module (used only for recir-
culation applications)
Note: Downdrafts work with these blo-
wers: 600 CFM Integrated, Remote or Inline
Blowers 1000 CFM Remote or Inline Blo-
wers
4
Parts Supplied
G Downdraft assembly (1)
G #8 Sheetmetal Screws (8)
G Blower Cord Strain Relief (1)
G Hardware for brackets on vent (2)
G Remote Blower Pigtail