On rare occasions, the reader will remain on even when the smart card is removed. The
reader's LED screen will display as shown below. To reset the reader, remove the battery and
then reinsert the battery. If the condition is not remedied, please contact BALP Support at
support@baimobile.com
Testing the baiMobile® 3000MP Bluetooth Reader
To verify that your Reader is operating normally, perform the following action
Your BlackBerry 10 device
Your BlackBerry 10 device
1. Insert your smart card into the reader. The
reader's LED panel displays Booting for
about 1.7 seconds, then displays AuthTime
for about 1.7 seconds.
Your Reader
Your Reader
23