Power On Screen 4 –Reader is now powered on and is "listening" for a Bluetooth connection
request from an application on your BlackBerry 10 device. User must first press the OK
button to accept a connection request. The reader will stay in this state for approximately 7
days until the battery is exhausted (firmware version 2.02.00 and higher) or until the Smart
Card is removed from the Reader, whichever occurs first. If the reader receives a connection
request from the BlackBerry 10 device, you may be prompted to authorize the request by
pressing and releasing the 0K button on the front of the reader.
Accepting a Bluetooth connection
NSA security requirements state that the user must accept (acknowledge) all Bluetooth
connection requests from his or her mobile device.
Examples:
When a client application on the mobile device needs to establish a Bluetooth
connection to the reader to access information (certificates) residing on the Smart
Card
When a client application on the mobile device requires that the user acknowledge an
action (digital signing) involving the Smart Card
In such cases, the reader will display a message prompt such as "Auth?" and the white LED
beneath the OK button will flash repeatedly until the OK button is pressed.
10