Table of Contents
Advertisement
The following attachments are designed to cut pasta sheets that have been
rolled using the KitchenAid Pasta Sheet Roller attachment (KPSA), which is sold
separately.
Angel Hair Cutter – Cuts pasta
sheets into fine, angel hair pasta
Noodle Cutter – Cuts pasta sheets
into thick egg noodles
Assembling Your Pasta Sheet Roller and Cutters
To Attach: Remove "Do not immerse
in water" label, prior to use.
Before Attaching Accessory, Turn OFF
and Unplug Unit.
1. Turn mixer OFF.
2. Depending on
which type of
hub you have,
either flip up
hinged cover
or loosen
attachment knob
(A) by turning it
counterclockwise
and remove
attachment hub
cover (B).
Pasta Cutter Attachments
A
B
C D
Cleaning Brush —
Use to brush away dried
dough after use.
NOTE: Never wash or
immerse attachments in water
or other liquid. Never wash in
dishwasher.
NOTE: These attachments are
designed to be used with pasta
dough only. Do not cut or roll any
other material or food with this unit.
NOTE: When using the machine,
do not wear ties, scarves or long
necklaces; gather long hair with a clasp.
3. Select Pasta Sheet Roller or cutter
attachment. Insert attachment
shaft housing (C) into attachment
hub (D), making certain that power
shaft fits into square hub socket.
Rotate attachment back and forth
if necessary. When attachment is in
proper position, the pin on the
attachment housing will fit into the
notch on the
hub rim.
4. Tighten
attachment
knob (A) until
unit is
completely secured to mixer. Please
refer to General Instructions in your
Stand Mixer Instructions and
Recipes book.
5
A
Advertisement
Table of Contents
