Recommended Antenna Connection - Radix ALPHA 4000 PVR User Manual

Radix_Eng.indd 13
1.3.3

Recommended Antenna Connection

Setting the PVR to Loop Mode.
1. When you have one antenna.
Input a single source to Tuner A, and input the output signal from
Tuner A to Tuner B using a splitter or loop through.
2. When a user has two antennas.
Connect two antennas to DiSEqC and in/outputs to Tuner A. Then
input the output signal from Tuner A to Tuner B using a splitter or
loop through.
Note: A splitter is recommended in the single mode. (For Tuner A, use
a splitter with the function of DC bypass, and for Tuner B use a splitter
regardless of the function of DC bypass.) Otherwise, it is recommended
to use a splitter. Use only a splitter in order to connect another set-top-
box using a loop through to your PVR.
Getting Started
2006-09-15
13
ｿﾀﾀ・11:37:48