Connecting The Antenna And Other Devices - Radix EPSILON 3 ci User Manual

5.2

Connecting the Antenna and Other Devices

Version 1.0
CAUTION:
Do not connect the receiver to the mains until you have correctly connected your
VCR, TV and any other analogue receiver you may have.
WARNING:
WARNUNG:
AVERTISSEMENT:
CAUTION
AVIS:
VORSICHT:
WARNING:
~
WARNUNG:
AC95~265V
AVERTISSEMENT:
50Hz MAX30W
CAUTION
AVIS:
VORSICHT:
HI-FI HI-FI
System System
(digital) (analogue)
• Use double-shielded coaxial cable to connect the LNB to the receiver.
CAUTION:
When assembling the F-type connector, make sure that no part of the inner wire-
mesh sheath touches the inner core (see diagram below). Failure to do so can
cause a short-circuit and damage your receiver.
Wire Mesh
Bent Wire
Core
• Tighten the safety nut on the F-type connector by hand only. Do not over
tighten!
Installing Your Receiver
Antenna
TV
DIGITAL
TV
L
RS 232
AUDIO
R
VCR ANALOG
Video External
Recorder Receiver
(analogue)
F-Type Connector
RF INPUT
+13V/+18V
400mA MAX.
RF OUTPUT
DIGITAL
F-Type Connector
External
Receiver
(analogue)
Page 9
GB