Delfi DelfiScan C51 Programming Manual page 9

Configure Your DelfiScan
Program & End System List, Group & Master Default
Scan Scan
"PROGRAM" "SYSLIST"
DelfiScan will list the product information and
DelfiScan will enter programming mode,
revision number to host via selected host interface,
and inhibit all non-programming functions.
then issue the completion beeping.
Scan
Scan
"M_DEFAULT"
"END"
DelfiScan will exit programming mode, and store all DelfiScan will recover all programmable
parameters into factory preset configurations,
parameters in Flash Memory ASIC or non-volatile memory,
then issue the completion beeping.
then issue the completion beeping.
Please note that the DelfiScan will take 3-4 seconds to store
parameters in internal Flash Memory ASIC or non-volatile
memory after you scan the "END". Please don't turn off the
power before the completion beeping. It may destroy all
configured parameters.
5