Advertisement
Quick Links
TEGAM is a manufacturer of electronic test and measurement
equipment for metrology, calibration, and production test. We
also provide repair, calibration, and other support services for
a wide variety of test and measurement equipment including
RF power sensor calibration systems, RF attenuation meas-
urement systems, resistance standards, ratio transformers,
arbitrary waveform generators, micro-ohmmeters, LCR
meters, handheld temperature calibrators, thermometers,
humidity and temperature control devices, and more.
TEGAM also repairs and calibrates test and measurement
equipment
formerly
manufactured
Industries (ESI), Gertsch, Keithley Instruments, Lucas
Weinschel, and Pragmatic Instruments. A complete list can be
viewed on our Product Service Directory at www.tegam.com
For more information about TEGAM and our products, please
visit our website at www.tegam.com: or contact one of our
customer service representatives at sales@tegam.com or
800-666-1010.
Ten Tegam Way,
Geneva, Ohio 44041
Telephone: (440) 466-6100
Fax: (440) 466-6110
E-mail: sales@tegam.com
by
Elcto-Scientific
Budget Series
Digital Thermometer
Instruction manual
Models 874F/C, 875F/C, 878 and 879
This owner's manual was as current as possible when this product was manufactured.
However, products are constantly being updated and improved. Because of this, some
differences may occur between the description in this manual and the product you
received.
TEGAM, INC.
TEN TEGAM WAY
GENEVA, OH 44041
TEL: (440) 466-6100
FAX: (440) 466-6110
www.tegam.com
Publication Date: Nov. 1996
Document Number: 874-901-02A
Advertisement
Related Manuals for Tegam Budget 874F
Summary of Contents for Tegam Budget 874F
- Page 1 Weinschel, and Pragmatic Instruments. A complete list can be viewed on our Product Service Directory at www.tegam.com For more information about TEGAM and our products, please visit our website at www.tegam.com: or contact one of our customer service representatives at sales@tegam.com or 800-666-1010.
-
Page 2: Statement Of Calibration
Custom Probes to suit your special temperature measurement appli- cations are also available from Tegam, Inc. Please call or send your cus- tom probe design to Tegam for price and delivery information. TABLE OF CONTENTS Additional Instruction Manuals are available. Order the manual package, Tegam Part Number 878-901-01, for a manual and any appli- cable addenda. -
Page 3: Specifications
Miniature junction responds with one second time constant. All stain- less steel construction is suitable for food industry, biological and chemical appli- cations. Accuracy is ±2.2°C or 0.75%, whichever is greater. Time constant is ACCURACY 2 TEGAM T.C. TEMPERATURE 1sec (liquids). Max tip temperature is 500°C or 932°F. -
Page 4: Manual Addenda
Improvements or changes to this manual will be explained on an performance of the instrument. These accessories are available through your addendum included with the instrument. All changes information local Tegam distributor or the factory. should be incorporated immediately into the appropriate places in the manual. -
Page 5: Battery Installation/Replacement
4. Turn on the instrument and use the following table to verify that NOTE the readings on each range are within specifications. An open sensor or overrange condition is indicated by the following display. Table 1. Performance Verification Model No. Range Reading Model No. -
Page 6: Environmental Conditions
MAINTANCE INFORMATION ENVIRONMENTAL CONDITIONS Operation of the instruments should take place at an ambient temper- This section contains information needed to maintain your instrument. ature of -10°C to 50°C (14°F to 122°F), less than 80% relative humid- The following information is included: functional check, performance veri- ity up to 35°C, reduce R.H.