Motorola EX-3524 Installation Manual page 25

Installation Guide
3. Configure the PC's COM port required settings using VT-100 terminal emulator software (such as
HyperTerminal) running on the management PC. The switch's default console port settings are:
• 115200 bps, 8 data bits, 1-stop bit and no parity
4. Log in to the command-line interface (CLI) using one of the default user login settings:
• username: admin
• password: motorola
or
• username: guest
• password: guest
NOTE
For a detailed description of connecting to the console and using the switch's command line interface (CLI), refer
to the CLI Reference Guide.
The guest default user login will only allow a user to view switch parameter data.
25