Basic Settings - D-Link DSL-2600U User Manual

DSL-2600U ADSL/Ethernet Router with Wi-Fi
User Manual

Basic Settings

On the Wi-Fi / Basic settings page, you can configure basic parameters of the router's WLAN.
Parameter
Hide Access Point
SSID
BSSID
Country
Channel
Clients Isolation
Enable Wireless Guest
Network
Guest SSID
When you have configured the parameters, click the Change button.
Figure 63. Basic settings of the wireless LAN.
If the checkbox is selected, other users cannot see your Wi-Fi
network. (It is recommended not to select this checkbox in order to
simplify initial configuration of your WLAN.)
A name for the WLAN. By default, the value DSL-2600U is
specified. It is recommended to specify another name for the
network upon initial configuration (use digits and Latin characters).
The parameter that uniquely identifies your wireless network. You
cannot change the value of this parameter.
The country you are in. Select a value from the drop-down list.
The wireless channel number. By default, channel 6 is specified. If
you want to use another channel, select a value from the drop-down
list. When the auto value is selected, the router itself chooses the
channel with the least interference.
Select the checkbox to isolate the users of your WLAN (to forbid
wireless clients to communicate to each other).
Select the checkbox to create a separate part of your WLAN with
open authentication type and with no password. Wireless devices
connected to this network can access the Internet, but are isolated
from the router's LAN.
A name for the guest part of your WLAN.
Page 69 of 112
Configuring via Web-based Interface
Description