D-Link DSL-2600U User Manual page 65

DSL-2600U ADSL/Ethernet Router with Wi-Fi
User Manual
Parameter
Dial on demand
PPP IP extension
Use Static IP Address
PPP debug
PPPoE pass through
The IP section is displayed for the Static IP and Dynamic IP connection types.
Figure 60. The page for creating a new connection. The IP section.
Parameter
IP Address
Netmask
Gateway IP Address
Vendor ID
When all needed settings are configured, click the Save button.
Select the checkbox if you want the router to establish connection to
the Internet on demand. In the Maximum idle time field, specify a
period of inactivity (in seconds) after which the connection should
be terminated.
This option is used by some ISPs. Contact your ISP to clarify if this
checkbox needs to be enabled.
Select the checkbox if you want to use a static IP address to access
the Internet. In the Static IP Address field displayed when the
checkbox is selected, specify a static IP address.
Select the checkbox if you want to log
debugging.
Select the checkbox if you want to allow PPPoE clients of
computers from your LAN to connect to the Internet through this
PPPoE connection of the router.
IP
Displayed for the Static IP type only.
Enter an IP address for this WAN connection.
Displayed for the Static IP type only.
Enter a subnet mask for this WAN connection.
Displayed for the Static IP type only.
Enter an IP address of the gateway used by this WAN connection.
Displayed for the Dynamic IP type only.
The identifier of your ISP. Optional.
Page 65 of 112
Configuring via Web-based Interface
Description
all data on PPP connection
Description