ViewSonic VG500-2 VLCDS24349-2W Service Manual page 24

DD C Recorder User Manual
1. Connect the recorder (with Keyport II )to the printer port on your PC.
2. Insert diskette into your PC's floppy drive, then turn on the PC power.
3. A setup main menu will be appear as below :
Select DDC Function Mode
[1
[2
[3 Bar Code : xtttddsssss
[4
[5 [F5] : Check DDC1
[6
[7] Mode Name : L5CNSE29.HWP
[8] Serial NO
[9] DDC Year
[A] DDC Weeks : 01
4. Recoding Process :
(1) Choose a correct mode name
(2)Press [Caps Lock]then key in the bar code number STHTAA00001,
And then Press [Enter].
The screen shows a green color sentence "Receive DDC Data OK"
(3) Be sure both the bar code number and DDC2 data are correct.
(4)After set power off --on, press[F5]to make sure the DDC1
and bar code number are correct.
5.Checking Process :
(1) After SET ON ,Press [F5]then verify DDC1 data .Press[F6] to
verify DDC2 data.
(2) During verification for either DDC1 or DDC2 a green color sentence will appear
"Receive DDC Data OK", and will disappear after 10 seconds.
ViewSonic Corporation
Auto Replace DDC Date
[F6] : Check DDC2
: sssss
: 2003
21
Confidential – Do Not Copy
VG500-2