ViewSonic VG500-2 VLCDS24349-2W Service Manual page 16

Control Explanation
displays the timing mode (video signal input)
Information
coming from the graphics card in your computer. See your
graphic card's user guide for instructions on changing the
resolution and refresh rate (vertical frequency).
VESA 1024 x 768 @ 60 Hz (recommended) means that the
resolution is 1024 x 768 and the refresh rate is 60 Hertz.
controls are explained below:
Manual Image Adjust
(Horizontal Size) adjusts the width of the screen image.
H. Size
Vertical size is automatic with your LCD display.
NOTE:
adjusts horizontal and vertical position of the
H./V. Position
screen image. You can toggle between Horizontal and Vertical
by pressing button [2]. Horizontal moves the screen image to
the left or to the right. Vertical moves the screen image up and
down.
sharpens focus by aligning the illuminated text and/
Fine Tune
or graphic characters.
Try the Auto Image Adjust (see page 12) before using the
NOTE:
Fine Tune control.
adjusts the clarity and focus of the screen image.
Sharpness
controls are explained below:
Setup Menu
allows you to choose the language used in the menus
Language
and control screens.
displays the recommended resolution for this
Resolution Notice
LCD display.
Enable allows the Resolution Notice to appear on-screen.
Disable will not allow the Resolution Notice to appear on-
screen.
ViewSonic Corporation
13 VG500-2
Confidential – Do Not Copy