Tuning Channels (Manual Channel Programming) - Panasonic TC-15LV1 Operating Instructions Manual

Press to select YES.
Press to select NO.
If YES selection
Press to run AUTO PROGRAM
Channels will automatically advance until all channels have been scanned. Channel numbers with a
video signal present will turn light blue indicating it has been stored in the Channel Scan Memory.
6
Press the RETURN button to return to the PROGRAM CHANNELS screen.
7
Press the TV MENU button to exit the set up menu.
Notes:
l
When buttons are pressed with AUTO PROGRAM running, the TV set will return to normal viewing. (Channels
searched up to this point are added.)
l
After AUTO PROGRAM is finished, the lowest channel number added will be received.
l
When there are no receivable channels, channel 69 is displayed for TV and channel 125 is displayed for cable TV.
I Tuning channels
(Manual channel programming)
Use this setting when changing the settings of received channels or changing the channel display.
Turn the TV on and select the broadcast channel. Follow the steps on the previous page to display the PROGRAM
CHANNEL screen.
Selecting the PROGRAM CHANNELS menu.
1
Refer to previous page Tuning channels step 1 to 3.
Press to select MANUAL PROGRAM.
Press to display the MANUAL PROGRAM
screen.
Adding or deleting channels
Press to select channel ( or number keys ).
Press to add channels to memory
Press to delete channels from memory
(Channel number turns yellow).
5
Repeat steps 3 and 4 to continue adding or deleting channels.
6
Press the TV MENU button to exit the set up menu.
17