Manual Tuning - Panasonic TX-15LV1F Operating Instructions Manual

Manual tuning

Manual tuning of the programme position is available either from the On Screen Display menu or from the side panel controls.
Turn the TV on and select the broadcast channel. Follow the step on the previos page to disply the Tuning menu screen.
(From the On screen Display menu)
It is possible to retune an individual programme position:
VCR
0
C
PICTURE
SOUND
SET UP
TV/AV
TV/ TEXT F.P. INDEX HOLD
ASPECT
STR N
1
CH44
Programme
down/up
Search
Return down/up
TV/AV E x i t
'STR' Button - Store
Manual tuning
21 68
(Via front panel)
It is also possible to use the control panel buttons on the front of your TV to tune individual programme positions:
1
Tuning mode
−, +: Yes
: No
F
1
CH44
SC-1
Manual tuning (Front panel)
−, +
: Search
TV/AV : Move cursor
STR : To store
F : To exit
21 68
SET UP
1
Press .
2
Move to the Tuning menu option by using
3
Access Tuning menu by using
4
Move to Manual tuning by using
5
Access Manual tuning by using
6
Select the programme position to be tuned by using
7
Press repeatedly until required station is found by using
When the desired station is found, press
The programme position will flash.
TV/AV
Press at any time to go back to watching TV.
1
Press until Tuning mode is reached.
2
Press or to access Tuning mode.
3
Press so the programme number frashes,then press
3
select the position you want to tune.
4
Press so the channel number flashes, then press
2
the search.
4
Change of TV System can be performed by this manual tuning.(Via front panel)
Press so the TV System frashes, the press
5
Press when you find the station.
1
Repeat to store other stations.
Press at any time to exit the Tuning menu.
5
Helpful Hint
(1) If a clear picture with correct colours cannot be obtained when a
Broadcast or AV signal is received, refer to the "Colour System
Selection" operation on page 25.
(2) When using a VCR without video and audio input/output terminals, it
is convenient to connect the aerial cable as indicated in the instruction
manual of VCR and to set the designated channel to programme No.
"0". In that case, perform manual tune after setting the colour system
in advance. Further, in multi-system VCR, it is more convenient to set
the designated channel to several programme Numbers.
Tuning menu
or .
or .
or .
or .
or
or
STR
to store.
or
or to start
or to select TV-system.
.
.
to
23