Toshiba Satellite 200 Series User Manual page 97

100
Learning the Basics
Transferring Files to Another Computer
For a serial connection, open the port cover on the left of
the computer and connect the serial cable to the serial port.
Connect the other end of the cable to the serial port on the
other computer.
For a parallel connection, connect one end of the parallel
cable to the parallel port on the back of the computer.
Connect the other end to the parallel port on the other com-
puter.
For an infrared connection, aim the computer's infrared
port directly at the infrared port on the other computer. The
two computers must be within 3 feet (1 meter) of each
other.
2 On one of the computers, click Start, then point to
Programs.
3 Point to TranXit2, then click TranXit.
Windows 95 opens the TranXit program.
4 Choose Connection from the Setup Menu.
5 If an appropriate Configured Connection is available,
choose it and go on to step 9. Otherwise, continue with the
next step.
6 Choose the appropriate type of connection in the Connec-
tion Type list.
The model name for infrared devices is Generic. Whether you
should use fixed or variable mode depends on the device
you're connecting to and what its settings are. Fixed mode
should work for other computers running TranXit, but you
may need to use variable mode to connect to infrared
equipped printers.
7 Choose the Setup Connection button.
8 Choose the port setting for the computer and choose OK.
9 Click the Enable Connection check box.