Prepare The Computer - Toshiba Satellite 200 Series User Manual

The drive partially ejects from the chassis.
Removing the diskette drive from the external chassis
3 Pull the diskette drive out of the chassis and set it aside.

Prepare the Computer

Follow these steps to prepare the computer for switching drives:
1 Shut down the computer.
To return to work more quickly, use the Suspend command or
Resume Mode to turn the computer off. See "Starting Again
Where You Left Off" on page 133 for more information.
Make sure the power is off before you swap a drive into or out
of the SelectBay. Removing or inserting a drive while the
computer is on may damage the computer, the drive or both.
2 Disconnect the power cord and any other cables.
Learning the Basics
Swapping Drives in the SelectBay
105