Swapping Drives In The Selectbay - Toshiba Satellite 200 Series User Manual

104
Learning the Basics

Swapping Drives in the SelectBay

Swapping Drives in the SelectBay
At times, you may want to install the diskette drive into the com-
puter and leave the CD-ROM drive at home. This section
describes how to swap a different drive into the SelectBay.
To use the CD-ROM drive, you'll have to install it in the com-
puter's SelectBay. The external chassis only works with the dis-
kette drive.
Make sure the power is off before you swap a drive into or out
of the SelectBay. Removing or inserting a drive while the
computer is on may damage the computer, the drive or both.
Remove the Diskette Drive from the External Chassis
If you're installing the diskette drive into the SelectBay, the first
step is to remove the drive from the external chassis.
If the diskette drive is currently in the SelectBay, the external chas-
sis is empty. Proceed to the next section.
Follow these steps:
Eject button
Releasing the drive in the external chassis
1 With one hand, press and hold the drive lock.
2 With the other hand, firmly press the drive eject button.
Lock